Having a garage door opener in West Bloomfield allows for the garage door to be opened or closed with a single touch of a button from the car. This allows for extra safety allowing for the garage to completely close before exiting the car. Garage door openers can usually be acquired through the manufacturer at either the time of install or at a later date. Sometimes a garage door opener does not come programmed, however programming it is a fairly simple task. Simple Steps to Programming a Garage Door Opener in West Bloomfield Firstly, find the “learn code” button on the actual garage door opener. The button may be on the sides or bottom depending on brand and model. Release the “learn code” button on the unit then look for a flashing light indicator or listen for a beep. This will ensure the garage door opener is in program mode. Decide which button will be used in the future for this task, press and release that button within 30 seconds of pressing the “learn code” button. It’s important this is done quickly otherwise all steps will have to be repeated. Once pressed again look for a flashing light or listen for a beeping sound to confirm that the remote is programmed. If it doesn’t seem to work there may be different instructions, contact a professional in West Bloomfield for help. Ensuring the Garage Door Opener is Properly Programmed in West Bloomfield To ensure the remote is accurately programmed it’s important to run a few tests. Press the button that was previously assigned to open the garage door and wait to see if it responds. If it does not respond the programming may have not worked. Alternatively different makes and models may have more intricate...